How to make a 24v power supply by adding to 12v power supplies?
Now days there are different trends in the market, you find a lot of people who ask you about 24v power supply. This was not the case some few years back. At the moment still there are many people who wanted and love to use 12v power supply. This serves the purpose best because it is a tool of taking input from the outside source and then transfers same energy to as output to the inner source. But still if you are willing to make the 24v power supply then this is not a difficult thing. But one thing that is required for this purpose is that you must have proper knowledge of the batteries and you know how to use them. As there are different types of power supplies so you have to be really careful if you want to do this experiment on your own.
The procedure of making one 24v power supply is not very much complicated. You just have to take two power supplies of 12v and then disassemble these, after doing this you have to add a little insulating washer under 2 screws. During this you have to connect the ground output and power supply case to the grounded point on the plug. After this you have to cut off the output ground of any single power supply. So this is simple procedure but still you have to be very sure before doing anything with your power supplies otherwise you may end up with something really damaging.
One more thing that is required in this case is that you have to perform all these things when you have learnt these properly and you have a confidence that you can do this correctly, then you have to start that otherwise if you left it in centre then it may become risky.